1、功能说明
    以基于自定义多项式的CRC16与CRC32计算为例展示了硬件CRC的基本功能和用法。
    
2、使用环境
    软件开发环境： KEIL MDK-ARM V5.34
                IAR EWARM 8.50.1
                
    芯片支持：
        N32H730  
        N32H735   
        N32H735EC
        N32H760
        N32H762
        N32H765
        N32H765EC
        N32H785
        N32H785EC
        N32H787
    
3、使用说明
    系统配置；
        1、时钟源： HSI+PLL
        2、系统时钟频率：600MHz
        3、打印：PA9 - baud rate 115200

    使用方法：
        1、编译后烧录到开发板，复位MCU。
        2、通过串口输出运行信息

4、注意事项
    无
    
    
1. Function description
    This example shows how to use the CRC module, using CRC16 and CRC32 calculation as examples, based on user defined polynomial.
    
2. Development environment
    Software development environment: KEIL MDK-ARM V5.34
                                      IAR EWARM 8.50.1

    Supported chips:
        N32H730  
        N32H735   
        N32H735EC
        N32H760
        N32H762
        N32H765
        N32H765EC
        N32H785
        N32H785EC
        N32H787
    
3. How to use
    System Configuration:
        1. Clock source: HSI+PLL
        2. System Clock frequency: 600MHz
        3. printf: PA9 - baud rate 115200

    Instructions:
        1. Compile the programme, and download to the evaluation board, then reset MCU.
        2. The running informations are output through the serial port.

4. Attention
    None