1、功能说明
    此例程展示了GPIO的基本配置方法。

2、使用环境

    软件开发环境：KEIL MDK-ARM V5.34
                  IAR EWARM 8.50.1
    芯片支持：
        N32H730  
        N32H735   
        N32H735EC
        N32H760
        N32H762
        N32H765
        N32H765EC
        N32H785
        N32H785EC
        N32H787

3、使用说明

    系统配置
        1、时钟源：HSI+PLL
        2、系统时钟频率：
            N32H76x系列： 600MHz
        3、GPIO：
           EVB开发板: PJ14-D1  PJ15-D2  PK4-D3
           其他：     PA1-D1  PA2-D2  PA4-D3

    使用方法：
        1、编译后将程序下载到开发板并复位运行。
        2、可观察到D1/2/3间隔1s循环点亮。

4、注意事项
    在SDRAM运行代码的例程支持N32H787_EVB开发板
    
1. Function description

    This example shows the basic configuration of GPIO.

2. Use environment

    Software development environment: KEIL MDK-ARM V5.34
                                      IAR EWARM 8.50.1
    MCU support:
        N32H730  
        N32H735   
        N32H735EC
        N32H760
        N32H762
        N32H765
        N32H765EC
        N32H785
        N32H785EC
        N32H787

3. Instructions for use

    System Configuration:
        1. Clock source: HSI+PLL
        2. System Clock frequency: 
            M7 Core:     600MHz
        3.GPIO:
          Boad EVB: PJ14-D1  PJ15-D2  PK4-D3
          Other：  PA1-D1  PA2-D2  PA4-D3

     Instructions:
        1. After compiling, download the program and reset, the program start running.
        2. D1/2/3 can be observed to light up cyclically at 1s intervals..

4. Attention
    The demo of running in the SDRAM is compatible with the N32H787_EVB development board.

