1、功能说明
    此例程展示了代码下载到Flash，跳转到1M内存的ITCM运行。

2、使用环境

    软件开发环境：KEIL MDK-ARM V5.34
                  IAR EWARM 8.50.1 
    芯片支持：
        N32H760
        N32H762
        N32H765
        N32H765EC


3、使用说明

    系统配置
        1、时钟源：HSI+PLL
        2、系统时钟频率：
            N32H76x系列： 400MHz
        3、GPIO：
            PA1-D2
            
        4、LOG配置：
            TX  -->  PA9 
            波特率：115200
            数据位：8bit
            停止位：1bit
            无校验

    使用方法：
        1、编译后将程序下载到开发板并复位运行。
        2、可观察到D2间隔1s循环点亮。

4、注意事项
    
1. Function description

    This example demonstrates downloading the code to Flash and jumping to run in the ITCM of 1M memory.

2. Development environment

    Software development environment: KEIL MDK-ARM V5.34
                                      IAR EWARM 8.50.1 
    MCU support:
        N32H760
        N32H762
        N32H765
        N32H765EC

3. How to use

    System Configuration:
        1. Clock source: HSI+PLL
        2. System Clock frequency: 
            M7 Core:     400MHz
        3.GPIO:
            PA2-D2
            
        4. LOG configuration:
             TX --> PA9 
             Baud rate: 115200
             Data bit: 8bit
             Stop bit: 1bit
             No verification

     Instructions:
        1. After compiling, download the program and reset, the program start running.
        2. D2 can be observed to light up cyclically at 1s intervals..

4. Attention
    None

