1、功能说明

    此示例展示IIR 轮询计算方式

2、使用环境
    软件开发环境： KEIL MDK-ARM V5.34
                IAR EWARM 8.50.1

    芯片支持：
        N32H730  
        N32H735   
        N32H735EC
        N32H760
        N32H762
        N32H765
        N32H765EC
        N32H785
        N32H785EC
        N32H787

3、使用说明
    系统配置；
        1、时钟源： HSI+PLL
        2、系统时钟频率：600MHz
        3、打印：PA9 - baud rate 115200

    使用方法：
        1、编译后将程序烧录到开发板并复位运行。
        2、通过比较reference_data和calculated_data之间的差异来验证过滤效果。
        3、通过串口输出运行信息。

4、注意事项
    无
    
    
1. Function description
    This example shows how IIR is calculated by polling
    

2. Development environment
    Software development environment: KEIL MDK-ARM V5.34
                                      IAR EWARM 8.50.1

    Supported chips:
        N32H730  
        N32H735   
        N32H735EC
        N32H760
        N32H762
        N32H765
        N32H765EC
        N32H785
        N32H785EC
        N32H787

3. How to use
    System Configuration:
        1. Clock source: HSI+PLL
        2. System Clock frequency: 600MHz
        3. printf: PA9 - baud rate 115200

    Instructions:
        1. After compiling, download the program and reset, the program start running.
        2. The filtering effect can be verified by comparing the difference between the reference_data and the calculated_data.
        3. The running informations are output through the serial port.

4. Attention
     None